March 22, 2011

DIY outdoor bench/cushion of sorts

Many of you have inquired about our outdoor seating you have seen pop in our pictures from time to time and I am finally getting to share about them now. Mind you these pictures are from last summer, so our garden looks nothing like this now. Right now it is weed filled and dirty, but I am in the process of cleaning and prettying it up.
DIY outdoor bench/cushion
Materials:
- 2 pallets of the same size
- High density 5'' thick foam cut to fit on top of pallet (bought at local craft store)
- Outdoor vinyl (to cover entirety of the foam)
- Waterproof tape (to wrap the vinyl around the foam)
- Outdoor canvas or duck cloth (enough to fit around the foam)

When Ben and I were first fixing up our yard last summer, we had such a hard time finding cozy seating that was our style. We wanted something simple and kinda natural looking, but everything we found in the stores looked cheap and were too expensive (not a great combo), and too patio-like. That wasn't for us. After brainstorming, I drew out what I wanted and wanted to see if Ben could make it. I just wanted simple wooden benches with something comfy on top. Then, after more brainstorming, we came up with this pallet idea.

One afternoon we went driving in local industrial areas and just started searching for pallets. We needed two of the same size to stack on top of each other, to make the seating the height we wanted. The first two pallets we saw were perfect and easy as they were just in the trash pile along with some broken ones, so we just stuck two good ones in our car. Then, the next two we came by was more difficult because we found them in a commercial trash container. Ben had to climb up and was carefully checking things out to find two good pallets that were the same size. When he did, he had to carefully lower them down to me (and man, those things are heavy) and try not to fall at the same time. We loaded those up and brought them home.
DIY outdoor bench/cushion
I cleaned the pallets by hosing them down. I took measurements and wrote them down and knew just how much foam I would need to buy. I went to Joann's to buy the foam and had 50% off coupons because that foam ain't cheap! It was probably the most expensive part considering the pallets were free.
DIY outdoor bench/cushion
I bring the foam home and place them on the pallets and with a serrated knife, cut it to the exact size I need. The width of a pair of the pallets was pretty wide, so I had to piece two pieces of foam together to get the full width. I took the vinyl and wrapped it completely around and made sure it overlapped, then just closed everything with waterproof tape. Sounds kind of like a quickie way of doing it as I am sure there is a much more chic way, but the foam was hidden and I didn't care. I just wanted it to not be able to get wet or damp.
DIY outdoor bench/cushion
Lastly, I just cut the duck cloth I got to fit the pallet with extra room to tuck in and under the cushion. I probably could have sewn a nice perfect cushion and maybe i will get to that eventually, but I just wanted something quick and natural. Now, voila! We had the perfect seating for us! There is plenty of room for lounging, reading, and doing some good 'ole relaxing!
DIY outdoor bench/cushion
Before we had all our rain, I made sure to bring the cushions and cloth in. The pallets stayed outside and have continued to weather, but I think it has a nice worn look. Plus, I love old things so that's cool with me!

Sorry there isn't much of a step by step, but it really is easy peasy and pretty self explanatory. Find 2 pallets, buy foam that fits on top, buy vinyl to go around the foam, close it up, and wrap it in cloth. Simple as that!

This look might not work for everyone, but it does for us. The best part is that it is much more budget friendly and matches our style more than anything we saw being sold out in the stores or online! Don't you just love a good, quick, and easy DIY?

* All these pictures were taken last summer. I have been meaning to share this DIY for so long now!

24 comments:

  1. I love this! What a brilliant idea.

    ReplyDelete
  2. Hmm..I have a stack of pallets in my garage and have been looking for some new outdoor seating. I may have just found my solution.

    ReplyDelete
  3. These are so great! If you used cool retro oil cloth could you skip the cloth on top...or are the two layers necessary for a reason that is eluding me?

    xo

    ReplyDelete
  4. elizabeth- i think if you sewed a cushion cover using the oilcloth, where it cover the entirety of the foam, then you probably wouldn't need the cloth on top. i just put the vinyl around to prevent any moisture from getting to the foam. my cloth on top doesn't cover all the way around, just enough to cover the top and tuck in the sides into the bottom, but the entire bottom isn't covered. make sense?

    ReplyDelete
  5. what a great idea! and i love the quilt...it's so beautiful!

    ReplyDelete
  6. USING THIS if we ever get a patio. I love it! It'll be perfect for the reception, too. ;)

    ReplyDelete
  7. Thank you SO much for sharing this! Searching for affordable backyard projects, and this is a winner, for sure.

    ReplyDelete
  8. Looks great! I'm going to have to steal this idea if I can get my hands on some pallets. I've been looking for some more seating for our patio, and this would be perfect.

    ReplyDelete
  9. very cool people!
    Love those bed couches things very comfy too!

    ReplyDelete
  10. awww that is such a cute and fun idea! you are such a crafty mama!!

    ReplyDelete
  11. Thank you for posting this! Just showed it to my hubsy & we're psyched to start birthday party planning for our girl. Gracias =)

    ReplyDelete
  12. btw, i just wanted to share this post with you! i'm wearing the dress i won from the kakalina rose vintage giveaway you had! i LOVE the dress, thanks again!! :)

    http://www.sandyalamode.com/2011/03/22/wiww-a-new-vintage-obsession/

    ReplyDelete
  13. Thank you! Yes that makes sense. We have a large backyard that we are going to try and reclaim this year so these benches might be just perfect for us!

    xoxo

    ReplyDelete
  14. Ahhh!!! This is such a clever idea. And we actually have two pallets sitting on our side yard at the moment that NEED to be turned into something amazing! This is it.

    ReplyDelete
  15. please do share pictures if/when any of you make your own DIY seating using pallets! it would be fun to paint them fun colors. i just didn't want to work that hard. ;)

    ReplyDelete
  16. SUCH A GOOD IDEA!!! I LIKE IT!!!

    ReplyDelete
  17. Wow,great idea! I guess if someone liked it more finished,they could just add some wood to cover the edges,but I think I like it like that..it also kind of makes me think of the princess and the pea story. :) You are so crafty,I love all your ideas!

    http://2011letters.blogspot.com

    ReplyDelete
  18. So creative. I never would have thought of this. Just a thought though. I work in a trucking company and we have to pay for those pallets, so if anyone want to take some, they really ought to make sure that they are being "thrown away". I would hate for anyone to get in trouble for stealing.

    ReplyDelete
  19. This is such a great idea! I've been trying to convince my husband that we should do this but he thinks they're a "creature catcher". Anyone that's done this - have you noticed a lot of bugs or spiders setting up house in the pallets?

    ReplyDelete
  20. unknown- that is true, but i just hose it all down every now and then and they go real fast!

    ReplyDelete

hello friends!

thank you for leaving a comment! i might not be able to respond to every comment or email, but please know every single one is special to us...

Related Posts Plugin for WordPress, Blogger...